Optical fiber identification instrument with red light source is a kind of optical fiber maintenance Necessary tools for lossless optical fiber identification work,as well The red light source can be used to test the light transmission of the optical fiber line Any position of the mode fiber is detected.During maintenance and installation When wiring,it is often necessary to look for it without interrupting the work And separate a specific fiber by putting 1310nm at one end Or1550nm with modulation tone(270Hz, 1kHz,2KHz)The signal is sent into the optical fiber and identified on the line with a recognizer To the effective direction.
| Project | Technical indicators |
| Product name | VFI+Fiber Identifiber |
| Type | parameter |
| Wavelength range | 800-1700nm |
| Signal recognition type | CW,270Hz±5%,1kHz±5%2kHz±5% |
| Detector type | ф1mm InGaAs 2 pcs |
| Adaptive fiber type | General purposeф0.25(bare fiber),
ф0.9,ф2.0,ф3.0 optical fiber jumper |
| Signal direction | LED indicator light left and right direction indication |
| Optical power reading range | -40dBm-+10dBm |
| Signal frequency range | 270Hz,1kHz,2kHz |
| Red light test wavelength | 650nm±10nm |
| Red light output power | >10mW |
| Alkaline battery | 2*AA 1.5V |
| Operating Temperature(℃) | -10~+60 |
| Storage Temperature(℃) | -25~+70 |
| Dimension(mm) | 240X47X29 |
| Weight(g) | 180 |
Location of breakpoints and confirmation of fiber optic cable deployment during fiber optic cable construction.
Troubleshooting and repair of optical cables during maintenance.
Fiber optic performance testing and cable management.
Fiber identification and confirmation during the installation and debugging process of fiber optic communication equipment.